ATTEN MS-1600 4 In 1 Rework Station

ATTEN MS-1600 is a professional 4-in-1 rework station designed for complex PCB/PCBA soldering, desoldering, component removal and electronics repair.

The system integrates soldering, hot-air rework, vacuum desoldering and electronic tweezers into a single workstation. A built-in vacuum system also supports a vacuum pickup pen for lifting components after desoldering. ATTEN describes the MS-1600 as supporting four tool channels that can work independently or simultaneously without mutual interference.

The station automatically recognizes compatible connected soldering tools and loads the corresponding parameters. It also provides automatic standby/sleep, password-protected settings, and RS485 and USB communication interfaces for computer connectivity/control.

Technical Specifications

Parameter	Specification
Brand	ATTEN
Model	MS-1600
Product Type	4-in-1 Rework Station
Functions	Soldering + Hot Air + Desoldering + Electronic Tweezers + Vaccum Pen
Maximum Total Power	1680W
Tool Channels	4
Channel Operation	Independent / Synchronous
Tool Recognition	Automatic
Built-in Vacuum Generator	Yes
Vacuum Pickup Pen	Supported
Auto Standby / Sleep	Supported
Password Protection	Supported
Communication	RS485 + USB
Hot Air Section
Hot Air Handle	SP-202D
Hot Air Power	1300W
Heater	HR-2102B
Handle Cable Length	120 cm
Handle Dimensions	185(L) × 40(W) × 40(H) mm
Handle Weight	Approx. 270 g
Soldering Section
Soldering Handle	GT-Y151
Soldering Power	150W
Tip Series	T156 Series
Standard Tip	T156-1.0I
Handle Cable Length	94 cm
Handle Dimensions	230(L) × 16(W) × 16(H) mm
Handle Weight	Approx. 78 g
Desoldering Section
Desoldering Gun	GT-X151
Power	150W
Heater	HS-5150N
Cable Length	114 cm
Dimensions	190(L) × 134(W) × 25(H) mm
Weight	Approx. 288 g
Electronic Tweezers
Tweezer Handle	GT-N080
Rated Power	80W
Tip Series	T210N Series
Standard Tip	T210N-0.5IS
Cable Length	94 cm
Dimensions	128(L) × 23(W) × 23(H) mm
Weight	Approx. 90 g
Vacuum Pickup Pen
Model	GT-B001
Cable Length	115 cm
Dimensions	170(L) × 10(W) × 10(H) mm
Weight	Approx. 25 g
Main Unit
Host Dimensions	300(L) × 295(W) × 125(H) mm
Host Weight	Approx. 11.7 kg
Primary Application	PCB / PCBA Soldering, Hot Air Rework, Vacuum Desoldering & SMD Component Repair

Key Features

4-in-1 intelligent rework workstation
Maximum 1600W system power
Four independently controlled tool channels
Simultaneous multi-tool operation
1300W hot-air gun
150W soldering iron
150W desoldering gun
80W electronic tweezers
Built-in vacuum generator
Vacuum pickup pen support
Automatic connected-tool recognition
Automatic parameter loading
Automatic standby and sleep
Password-protected settings
RS485 communication
USB communication
Computer-control support
Designed for complex PCBA repair and rework

Applications

PCB / PCBA Soldering – Precision component and joint soldering.
Hot-Air SMD Rework – Removal and installation of compatible SMD components.
Vacuum Desoldering – Removal of solder from through-hole and other compatible joints.
SMD Component Removal – Electronic tweezers support handling/removal of small SMD components.
IC Rework – Hot-air processing for compatible IC packages.
Component Pickup – Vacuum pen can lift components after desoldering.
Industrial PCB Repair – ATTEN identifies industrial control-board repair as a suitable use case.
R&D and Prototype Rework – Suitable for development, debugging and board modification.
Professional Repair Centres – Multiple integrated tools reduce the need for separate stations.